Any items we sell as customizable, such as our grinders, can be sent back for customization. Your unit needs to be clean and free of dirt. We can engrave grinders, sidekicks, pax or mods or most things with a finish.

We recommend to clean the bowl out after each use along with the top of the chamber. Also, brush your screen on the top and bottom of it to remove any debris. We recommend cleaning out the vortex cooler after about 10 uses or if it becomes harder to inhale. A nice deep clean is […]

This is not going to ruin your unit. Try to get out all the oil and waxes you can with a tidy tip or q-tip. Then turn the unit on and burn off any oils. Feel free to inhale these oils.

This does not work well, and we suggest to mix with just a little flower in the standard wand you use for your vaporizer.

You can vape hash out of the Silver Surfer, Super Surfer, Da Buddha in your wand. Note to have a little herb under the hash works out well. The screen will clog up fairly fast, but inhale and get big hits, then remove any hash after you have gotten a good amount of hits. Then […]

The fan on the Super Surfer will be able to cool the unit down much faster than just turning it off. If you want you can use the fan also to preheat a FlavorDisc. Once you see vapor coming out, then put your bag-valve up to the bag bowl.

This is best done with a pick that came with your SideKick. If it is used, the tube with vortex cooler will be easy to get out, just push down with your pick and the tube and cooler will come out. The other tube is a little more tricky. You will want to remove your […]

There could be 2 reasons for this.1 is that the heater cracked and broke.2Nd is that the heater is not fully screwed in. If you feel it is tight let’s look at why maybe the heater broke. The heater can burn out for a few reasons. First, if you use a mod and take the […]

The best way is to remove the heater cover from your Silver Surfer after it has cooled down. Then take a razor blade and scrape it until it is clean. Replace the heater cover and you should be good to go.

The best way to see how this works is by going to the product page. The first 3 modes are light color up and then back down. This mode has the options at 5 seconds, 10 seconds, and 20 seconds to go up and then back down. The next mode is the same 5, 10 […]