The Atmos Kiln RA

Final Review of The Kiln RA Vaporizer

The Kiln RA (replaceable atomizer) is a conduction vape made for waxy, shatter type concentrates. It uses a ceramic “doughnut” heating element. It has the industry standard of 5 clicks on and 5 clicks off. You simply hit and hold the single button, wait 1-2 seconds and start your draw. Your draws, I find with the Kiln RA can be harsh and cause more coughing than seen with other pens.

Filling the Kiln RA can be a little challenging, you need to use your particular tool to place your concentrate down in the chamber. The material can get stuck on the sides which will, of course, inhibit proper function. The recess within the chamber makes this vape very difficult to clean as any residue will be trapped under the heating element. The gap from the base of the chamber to where the concentrate will come in contact with the doughnut is far too great to provide efficiency, as you will have to load quite a bit of material in the Kiln RA first.

I could not recommend this vape to anyone who is just getting into the concentrate and pen realm as the maintenance, and just overall efficacy of this product makes it just too demanding.

Coming in at a respectable value at under $100.00 may make this device appealing, I would advise anyone looking at purchasing it to give it a second thought as there are other options.